Many friends are interested in the production process of fireproof board. Today, fireproof board manufacturers come to talk about the production process and maintenance of fireproof board. Let's learn about it with Xiaobian.

防火板的制造進程，是由裝飾紙、牛皮紙經過含浸、烘干、高溫高壓等加工步驟制造而成：首先，將裝飾紙、牛皮紙別離含浸在三聚氫氨樹脂及苯荃樹脂反響槽中，含浸一段時間后別離烘干，并裁切成需求的尺寸，再將這些含浸過的裝飾紙與多張牛皮紙(視防火板不同厚度而定)排疊在一同，放置壓力機下。

The manufacturing process of fireproof board is made of decorative paper and kraft paper through soaking, drying, high temperature and high pressure and other processing steps: first, soak the decorative paper and kraft paper in the reaction tank of trimeric ammonia resin and benzene resin, dry them after soaking for a period of time, cut them to the required size, and then mix these soaked decorative paper with multiple kraft paper (depending on the thickness of the fireproof board), stack them together and place them under the press.

在華氏300度(約攝氏150度)的高溫下，加以每平方英寸1430磅的壓力，持續均衡施壓一個小時，再經修邊、砂磨、品質檢驗等步驟制造而成。施工保養防火板防火板在裝置板材時，資料有必要使其到達室溫標準并保持穩定的溫度。資料不得裝置于和正常運用場所極為不同之溫度的地點。

At 300 degrees Fahrenheit (about 150 degrees Celsius) Under the high temperature of 1430 pounds per square inch, continue to apply balanced pressure for one hour, and then manufacture the fireproof board through trimming, sanding, quality inspection and other steps. When constructing and maintaining the fireproof board, it is necessary to make it reach the room temperature standard and maintain a stable temperature. The data shall not be installed at a place with a temperature very different from the normal use place.

防火板裝飾平板及天花板屬于室內裝飾產品，規劃用于一般正常運用空間在15℃-30℃度裝置，相對濕度不行超過70%.所有石膏、水泥、磨石子或其他濕潤性的工程都有必要放置穩當。在裝置之前，進行中或完成后，暖氣通風及冷空調體系都得先行裝置妥及可運用，以便保持正常的溫度。

The fireproof board decorative flat plate and ceiling belong to indoor decoration products, which are planned to be used for devices with normal use space of 15 ℃ - 30 ℃, and the relative humidity shall not exceed 70%. It is necessary to place all gypsum, cement, grinding stone or other wet works stably. Before, during or after the installation, the heating, ventilation and cold air conditioning system must be properly installed and available for use in order to Maintain normal temperature.